How many times did your 3D printer’s nozzle bump into extruded parts during retraction? Whether it’s often or just some times, the Z hop feature could help. Cura Z hop is a slicer feature...
Archives: Blog
ABS is the second-most-common hobbyist 3D printing material after PLA. However, it is not as easy to work with as PLA, and you might even wonder whether you can use it on your Ender 3...
Whether you have to replace a worn-out nozzle or switch to one with a smaller or larger diameter, removing and changing a 3D printer nozzle could seem challenging. Changing the Ender 3 (Pro/V2)...
Your 3D printer’s hot end can determine extrusion quality. If it is dirty or clogged, it may under-extrude and impact the quality of your print. The easiest way to clean an Ender 3 nozzle is...
Thinking about associated hazards before buying a 3D printer is essential. Fire hazards are notorious, but these machines also generate volatile organic compounds (VOCs) and...
Bragging with many positives compared to other filament types, PETG’s popularity is on the rise. This material is highly compatible with PEI beds, but what about glass? To print PETG on an...